Astonishingly Bright Stick-Up Light
Atomic Beam TapLight
$9.99
Product Highlights
- EASY TO INSTALL: just peel, stick, and tap for instant bright light – no wires, no pliers required.
- HANDS-FREE LIGHT: just tap the light’s surface for instant hands-free light.
- INCLUDED: one (1) Atomic Beam TapLight (batteries not included).
More Details
Can’t see in the corners of your closet, pantry, or attic because your hanging light’s illumination just can’t reach? Atomic Beam TapLight™ gives you hands-free, wire-free atomic bright LED light when and where you need it. There’s no complicated installation and no tools required. Simply peel, stick, and tap for instant bright light. TapLight sticks to virtually any surface. Use TapLight instead of a flash light in your cabinets, attic, or any nook and cranny shrouded in darkness. TapLight uses Atomic Beam Flat Panel Technology for an atomic bright light. Have kiddos? Unlike regular bulbs that get hot and scorch skin, TapLIght uses LED light so it stays cool to the touch. It’s perfect to use as a night light, too! Peel, stick, and tap for the fuss-free lighting accessory!
- Atomic Bright LED Light
- Installs in seconds
- Sticks to virtually any surface
- Hands-free
- Easy to use
- Perfect for closets, pantries, attics, and more
- Requires 3 AAA batteries (not included)
- Includes 1 Atomic Beam TapLight™
* Packaging May Vary
HOW BIG IS ATOMIC BEAM TAPLIGHT??
Atomic Beam TapLight is 3.125-inches in diameter and approximately 1-inch deep.
WHAT COLOR IS ATOMIC BEAM TAPLIGHT?
Atomic Beam TapLight has white plastic housing and silver accents. The LED panel is yellow.
WHAT TYPE OF BATTERIES DOES ATOMIC BEAM TAPLIGHT USE?
Atomic Beam TapLight uses 3 AAA batteries, which are not included.
HOW DO I “INSTALL” TAPLIGHT?
Remove the paper protecting the adhesive, stick to your desired surface, then tap to turn on.
HOW DO I PUT THE BATTERIES IN THE LIGHT?
Simply twist the back-cover counter-clockwise to open the battery compartment and pull it away from the main light unit. Then add the batteries. Screw the back cover back onto the light unit in a clockwise direction.
HOW DO I MOUNT TAPLIGHT?
Prepare the hard, smooth surface you want to mount the light on by cleaning with a mild cleanser to remove dirt. Then, unpeel the paper backing on the double-sided tape. Push firmly to the surface.
CAN I MOUNT ATOMIC BEAM TAPLIGHT USING SCREWS?
Unfortunately, Atomic Beam TapLight does not accommodate any other mounting methods.
HOW DO I TURN ON ATOMIC BEAM TAPLIGHT?
After batteries are installed, simply push the center of the light on the clear lens. Press again to turn the light off. You’ll hear a click each time you press it on or off.
DOES THE LIGHT SURFACE GET HOT?
Since Atomic Beam TapLight uses a LED flat panel, the light does not get hot.
CAN I USE THIS LIGHT AS A NIGHTLIGHT FOR MY CHILD?
Yes. Atomic Beam TapLight does not get hot, so it’s safe for your child’s hands.
WHERE CAN I USE TAPLIGHT?
You can use TapLight anywhere you need bright light! Try adding TapLight to your pantry, bedroom, under a cabinet, in a closet or attic, or in your garage.
WHAT ARE THE CONDITIONS OF THE GUARANTEE?
Your satisfaction is 100% guaranteed. If you are dissatisfied with your Atomic Beam TapLight for any reason, simply return the product within 30 days for an easy refund of your purchase price, excluding shipping and handling. See our return policy for more information. Exceptions may apply.
Product Highlights
- EASY TO INSTALL: just peel, stick, and tap for instant bright light – no wires, no pliers required.
- HANDS-FREE LIGHT: just tap the light’s surface for instant hands-free light.
- INCLUDED: one (1) Atomic Beam TapLight (batteries not included).
Description
Can’t see in the corners of your closet, pantry, or attic because your hanging light’s illumination just can’t reach? Atomic Beam TapLight™ gives you hands-free, wire-free atomic bright LED light when and where you need it. There’s no complicated installation and no tools required. Simply peel, stick, and tap for instant bright light. TapLight sticks to virtually any surface. Use TapLight instead of a flash light in your cabinets, attic, or any nook and cranny shrouded in darkness. TapLight uses Atomic Beam Flat Panel Technology for an atomic bright light. Have kiddos? Unlike regular bulbs that get hot and scorch skin, TapLIght uses LED light so it stays cool to the touch. It’s perfect to use as a night light, too! Peel, stick, and tap for the fuss-free lighting accessory!
- Atomic Bright LED Light
- Installs in seconds
- Sticks to virtually any surface
- Hands-free
- Easy to use
- Perfect for closets, pantries, attics, and more
- Requires 3 AAA batteries (not included)
- Includes 1 Atomic Beam TapLight™
* Packaging May Vary
FAQs
HOW BIG IS ATOMIC BEAM TAPLIGHT??
Atomic Beam TapLight is 3.125-inches in diameter and approximately 1-inch deep.
WHAT COLOR IS ATOMIC BEAM TAPLIGHT?
Atomic Beam TapLight has white plastic housing and silver accents. The LED panel is yellow.
WHAT TYPE OF BATTERIES DOES ATOMIC BEAM TAPLIGHT USE?
Atomic Beam TapLight uses 3 AAA batteries, which are not included.
HOW DO I “INSTALL” TAPLIGHT?
Remove the paper protecting the adhesive, stick to your desired surface, then tap to turn on.
HOW DO I PUT THE BATTERIES IN THE LIGHT?
Simply twist the back-cover counter-clockwise to open the battery compartment and pull it away from the main light unit. Then add the batteries. Screw the back cover back onto the light unit in a clockwise direction.
HOW DO I MOUNT TAPLIGHT?
Prepare the hard, smooth surface you want to mount the light on by cleaning with a mild cleanser to remove dirt. Then, unpeel the paper backing on the double-sided tape. Push firmly to the surface.
CAN I MOUNT ATOMIC BEAM TAPLIGHT USING SCREWS?
Unfortunately, Atomic Beam TapLight does not accommodate any other mounting methods.
HOW DO I TURN ON ATOMIC BEAM TAPLIGHT?
After batteries are installed, simply push the center of the light on the clear lens. Press again to turn the light off. You’ll hear a click each time you press it on or off.
DOES THE LIGHT SURFACE GET HOT?
Since Atomic Beam TapLight uses a LED flat panel, the light does not get hot.
CAN I USE THIS LIGHT AS A NIGHTLIGHT FOR MY CHILD?
Yes. Atomic Beam TapLight does not get hot, so it’s safe for your child’s hands.
WHERE CAN I USE TAPLIGHT?
You can use TapLight anywhere you need bright light! Try adding TapLight to your pantry, bedroom, under a cabinet, in a closet or attic, or in your garage.
WHAT ARE THE CONDITIONS OF THE GUARANTEE?
Your satisfaction is 100% guaranteed. If you are dissatisfied with your Atomic Beam TapLight for any reason, simply return the product within 30 days for an easy refund of your purchase price, excluding shipping and handling. See our return policy for more information. Exceptions may apply.